How to Mount a TV on a Studless Wall: A Step-by-Step Guide for 2025

Mounting a TV on a studless wall can seem daunting, but with the right tools and techniques, it’s entirely achievable—even for beginners. Whether you’re a renter avoiding permanent damage or a homeowner dealing with tricky drywall, this 1,300-word guide will walk you through ​how to mount a ty on a studless wall, recommend the best hardware, and answer common FAQs.

Why Mount a TV on a Studless Wall?

Traditional TV mounts rely on wooden or metal studs for support. However, studless walls (drywall, plaster, or concrete) require alternative anchoring methods. Here’s why studless mounting is growing in popularity:

• ​Renter-friendly: No need to drill into studs or leave gaping holes.
• ​Flexible placement: Mount your TV anywhere, even between unevenly spaced studs.
• ​Modern solutions: Advanced anchors and adhesives now support TVs up to 100+ lbs.

But safety is critical. A poorly installed studless mount can damage your wall or TV. Follow these steps to avoid costly mistakes.

Step 1: Gather the Right Tools and Materials

Before starting, ensure you have:

• ​Studless TV wall mount (fixed, tilting, or full-motion).
• ​Heavy-duty wall anchors: Toggle bolts, snap toggles, or adhesive anchors (more on this below).
• ​Power drill with assorted bits.
• ​Level, measuring tape, and pencil.
• ​Screwdriver (manual or electric).
• ​Safety gear: Gloves and goggles.

Pro Tip: Check your TV’s weight and VESA pattern (the screw hole layout on its back) to ensure compatibility with the mount.

Step 2: Choose the Best Anchors for Studless Walls

The anchor type depends on your wall material and TV weight:

​A. Toggle Bolts (Best for Drywall/Plaster)

• ​Weight Capacity: Up to 100 lbs per anchor.
• ​How They Work: Metal or plastic wings expand behind the wall for grip.
• ​Top Pick: ​Snaptoggle Toggler (rated for 265 lbs in drywall).

​B. Adhesive Anchors (No-Drill Option)

• ​Weight Capacity: Up to 50 lbs.
• ​How They Work: Heavy-duty adhesive strips (e.g., 3M VHB) bond the mount to the wall.
• ​Top Pick: ​Innovative Mounts OLSW-200 (ideal for small TVs).

​C. Concrete Anchors (For Brick/Masonry)

• ​Weight Capacity: 100+ lbs.
• ​How They Work: Screws expand inside pre-drilled holes.
• ​Top Pick: ​Tapcon Masonry Screws.

Step 3: Mark and Prep the Wall

1. ​Find the Ideal Height:

   • Eye level when seated is standard (42–60 inches from the floor).
   • Use a stud finder to confirm there are no hidden studs in the area.

2. ​Mark Drill Points:

   • Hold the mount’s bracket against the wall.
   • Use a level to ensure it’s straight, then mark holes with a pencil.

3. ​Check for Wiring/Pipes:

   • Use an electronic stud finder with live wire detection to avoid drilling into electrical lines.

Step 4: Install the Anchors and Mount

​For Toggle Bolts (Drywall/Plaster):

1. Drill a hole slightly larger than the collapsed toggle bolt.
2. Insert the toggle into the hole and pull the wings open behind the wall.
3. Tighten the bolt until the mount is secure.

​For Adhesive Anchors (No Drill):

1. Clean the wall with rubbing alcohol to remove dust.
2. Apply adhesive strips to the mount’s bracket.
3. Press firmly against the wall for 30 seconds and let cure for 24 hours.

​For Concrete Walls:

1. Use a masonry bit to drill pilot holes.
2. Insert concrete anchors and tighten with a drill.

Step 5: Attach the TV to the Mount

1. Secure the mounting plate to the TV’s VESA holes.
2. Enlist a helper to lift the TV onto the wall bracket.
3. Lock the TV into place using safety screws or latches.

Safety Check: Gently tug the TV to confirm stability. If it wobbles, reinforce the anchors.

Best Studless TV Wall Mounts for 2025

1. Studless TV Wall Mount, Drywall Hang Smart TV Mount Bracket fits VESA 26-55 inch up to 100 lbs Flat TV Hanger No Drill, No Stud Easy Install with All Hardware Included

• Wide compatibility:Wide compatibility：Audend Studless TV wall mount is compatible with most major TV brands on the market, including Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, Hisense, and more. It supports TV sizes from 26 to 55 inches, with VESA patterns ranging from 100x100mm to 400x400mm（Check the TV’s manual）

• Quick 10-minute installation: Tired of drilling big holes or searching for wall studs? Audebd no drill tv mount just use a hammer to attach the wall plate with nails to the drywall. It includes a bubble level and all necessary hardware. No experience required, and you can easily install it by yourself

• Solid As A Rock：Made of heavy-duty alloy, Audend flat tv wall mount is sturdy and durable, having undergone triple strength testing to support weights of up to 100 lbs. Additionally, the mount comes with anti-drop bolts for double protection, ensuring the safety of your expensive equipment
• Adjustable and Low Profile：Audend no drill tv mount comes with adjustable spacers, offering a tilt angle of up to +5° to prevent glare. Additionally, it sits just 0.8" away from the wall, saving space while seamlessly fitting into living areas. elevating your room's overall aesthetic
• Multi-scene use：Hangsmart tv mount is not only perfect for living rooms and bedrooms but also ideal for gyms and garages. It can be installed on most vertical surfaces, including drywall, wooden walls, and plasterboard.Note:Drywall thickness must be greater than 0.4"

Safety Tips for Studless TV Mounting

• ​Never exceed the mount’s weight limit. Add 20% buffer (e.g., for a 50-lb TV, use a 60-lb-rated mount).
• ​Avoid mounting over fireplaces unless using heat-resistant anchors.
• ​Test anchors periodically: Tug the mount lightly every 6 months.

Mounting a TV on a studless wall is simpler than ever with modern anchors and no-drill solutions. By choosing the right hardware (like Sanus toggle bolts or ECHOGEAR’s reusable system) and following our step-by-step guide, you can achieve a secure, professional-looking setup.